Red Oak prefinished wood veneer 24" x 48" with PSA peel and stick pressure sensitive backer. Medium gloss finish. The photos are representative. Actual product you would buy would vary in grain and color (appearance), but would be standard for Red Oak. Color can be lighter straw color to slightly pink color. No need to buy finish or paint brushes or deal with the smell or mess and time to finish it yourself. Count on quality. Some photos may show other sizes.
Almost any species can be produced in prefinished. Also available without PSA backer in paper and wood backer. Some minimums may apply for exotic species. Pricing will be similar to this item for domestic commodity woods, but obviously higher for exotics.
Visit My Store: JSO Wood Products
Other similar products may be available
About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show order what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.
Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.
Thickness: (will not always be exactly correct, but relatively close)
Paper-backed veneers = 1/40
Wood-backed veneers = 1/25
Raw plain veneer with no backing = 1/32-1/42
How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge.
How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.
How to finish: most any conventional finishing products can be used with veneer that is applied correctly.
Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldnt impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect.
Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.
Exported By ExportYourStore :)
SKU:mx1_120919500306_D11C150291C74A39B7C16CC*
Product code: Red Oak prefinished wood veneer 24" x 48" order with PSA peel and stick backer 3M