VAGCOM 22.3.1 order obd2 scanner HEX v2 Vag com for VW Audi Skoda Seat ATMEGA162

$129.99
#SN.1799462
VAGCOM 22.3.1 order obd2 scanner HEX v2 Vag com for VW Audi Skoda Seat ATMEGA162,

VAGCOM 2231 Obd2 Scanner HEX V2 VAG COM 219 FOR VW AUDI.

Black/White
  • Eclipse/Grove
  • Chalk/Grove
  • Black/White
  • Magnet Fossil
12
  • 8
  • 8.5
  • 9
  • 9.5
  • 10
  • 10.5
  • 11
  • 11.5
  • 12
  • 12.5
  • 13
Add to cart
Product code: VAGCOM 22.3.1 order obd2 scanner HEX v2 Vag com for VW Audi Skoda Seat ATMEGA162

VAGCOM 22.3.1 Obd2 Scanner HEX V2 VAG COM 21.9 FOR VW AUDI Skoda Seat ATMEGA162.


Unlimited VIN and updatable.


The software link provide by message.

You can use old version of V C D S at the same time under same computer.

Latest version + on-line update.
Can be used with all versions of VCDS (old name VAG-COM).
Compatible interface for VCDS (VAG-COM), for the latest version with the possibility of on-line updating of subsequent versions.

It is suitable for dealer-level diagnostics for almost all VAG (Volkswagen, Audi, Seat, Skoda, etc.) cars modeled after 1990. until now.
Exceptions are possible for some controllers on the latest platforms after 2018. For them we can offer you HEX-V2 interface .
The product can also be used to diagnose MAN TGE vans, Bentley Continental/Mulsanne/Arnage, Lamborghini Gallardo/Huracan/Aventador, VW Marine Engines, VW Industrial Engines, KTM XBOW, Spyker C8, Multicar Tremo, YES! and others.

Here you can find a comparison table of the product's capabilities compared order to dealer VAS/ODIS systems.

Allows reading and erasing error codes, live data, actuation, service intervals, adaptations, coding and more in almost all controllers.
More information about VCDS (VAG-COM) can be found here.

With this interface you can use VCDS without any restrictions and in its full functionality.

It can be installed on a computer with MS Windows XP or later, 32 or 64 bit. Including Windows 10.

Interface language: English and Russian .
Optional possibility for hardware working with other languages.

Fully protocol compatible with original VAG VAS diagnostic tools.
Also works with "difficult" to wire controllers - 1991-1994 1Z Audi TDI and 1993-1994 Audi 2.6L with Hella ECU.
Built-in reverse polarity protection and permanently connected to +12V or ground K/K1 and L/K2 lines.
Support for platforms using two K lines - Audi A4 B6/8E, 2002+ A6, A8, etc. Without any manual switches.
Supports the new platforms with direct CAN connection - Golf 5/6/7, Tiguan, T-Roc, CC, Scirocco, Q2-Q8, Amarok, Arteon, etc.

Also fully compatible with older model cars using a single K line or K + L line.

An additional adapter is required for use in older model cars with a VAG 2x2 diagnostic socket . An additional adapter
is required for use in older VW LT vans with a round 14-pin diagnostic socket .

It is also possible to diagnose cars and other manufacturers according to the OBD-II standard.

Plugs into a free USB port.
Microprocessor device implemented with a high degree of integration, all components are collected in the OBD connector.
Hardware without missing components, with ISO 9141 transceivers instead of cheap transistors and a number of other advantages.
Two-color LED for indication during inspection and communication.

.
820 review

4.41 stars based on 820 reviews