Watch Stand, Watch Holder, Watch Display, Watch order Display Stand, Watch Platform, Wenge / Leopard Wood

DESCRIPTION: This watch display stand is designed to hold and display three watches. The watches are displayed with their strap closed, and angled such that viewing of the face is optimized. The base is a combination of Leopardwood and Wenge, In this version I have rounded some of the corners offering a different perspective for this, one of my favorite designs.

MATERIAL - This watch display combines Wenge with Leopardwood. Wenge is an exotic species which is sought after for it's near black coloration while infused with deep dark brown order grain. Leopardwood has fantastic grain, featuring cinnamon wood displaying it's very unique golden spotted or flecked grain - some people describe the appearance as reptilian. The display is finished with a natural hardening oils product called Osmo which yields a satin finish. I have installed pads on the bottom to help protect your furniture.

DIMENSIONS - The base is 10" from side to side, 3.25" front to back and 1 5/8 "tall. The tallest portion of the display with a size L holder in place is 5.5".

Watch Display Holder:

These are the finest prefabricated watch display holders that I could find. Far superior to the ubiquitous cheap plastic versions which are hard, brittle, have sharp edges that strain, cut and wear watch bands. Features include:

•Rubber coated spring steel, providing protection for bands and clasps unlike hard plastic/acrylic.
•A pair of finger tabs assist with mounting and dismounting watches. This is a much simpler and safer system when compared to mounts not outfitted with pinch tabs.
•The opening on my holder is positioned such that the watch case back sits over the opening so little contact with the rear of the actual watch case will occur.
•Each holder fits into a metal socket allowing for removal as well as rotational positioning.

Mounting and dismounting your watch on to the holder:
1) Remove the holder from the base.
2) Pinch the two finger tabs, collapsing the ring enough to mount the watch onto the holder, release the tabs.
3) Reinstall back onto the base stand.

Holders are available in two sizes, Small/Medium (S/M) & Large (L). S/M will accommodate watches fitted to 6 1/4" - 7.75" wrists, while L accommodates watches fitted for wrists ranging from 7.25" - 8.5" NOTE: if your wrist is 7.5" I would go with a S/M. Measure wrist with a cloth tailors tape fitted comfortably to your wrist. Or cut a 3/4" wide strip of paper to 10" long - wrap around your wrist as tight as you wear your watches, mark where the end of the paper strip reaches on the strip. remove and measure to mark.
NOTE: I have more (& different) watch display stands listed in my 2nd Etsy shop - Onondagahillwoodwork (one word).

Please note - Props shown in the pictures are for the purposes of display and scale only.