3d Gardenia Set 4 silicone molds. Large 3d flower mold. order Mold for Resin. Realistic flower mold.

Peony Set of 4 silicone molds for soap. Large flower mold silicone for soap arrangement

The listing is for 4 (four) silicone molds.
Size of gardenia flowers made with soap:
Width: approx 3"
Height: approx 2"
Weight of soap:
1 - 2 1/8 oz. (60 gr.)
2 - 2 oz. (56gr.)
3 - 1.5oz. (45 gr.)
4 - 0.7 oz. (20 gr.)


PLEASE READ BEFORE PLACING YOUR ORDER:

This mold requires special skills to work perfectly, as the flower petals are very realistic and delicate.

All the molds have been tested with M&P soap. When using other materials such as resin, wax, chocolate, & fondant, they can be very tricky. Consider your material & skills in the materials you are working with.

If you are working with resin, use a spray release.

If you are working with wax, consider the fragility of the wax. Delicate and thin flower petals can break when released from the mold. When working with paraffin and similar fragile materials, I do not recommend using order flower molds with realistic thin petals.

All molds are custom made to order. Time for manufacturing takes 1-5 working days.

Silicone undergoes vacuum treatment to remove air bubbles, as well as to increase service life of molds.

All 3d forms have 1-3 cuts on the sides of Molds. It is necessary for extraction of the finished product without cracking or breaking. All 3d molds have a positive keyed alignment feature on the cuts (the cuts are made in the form of a semicircular groove).

The new silicone sticks together and the slits become invisible. You just need to stretch the mold from the middle in different directions and the mold will open. Do not make cuts yourself, you can ruin your mold. If you have any questions, feel free to text me. We are always ready to help and respond with a few hours.

PLEASE NOTE: the vertical cut is not allowed to be straight, since the cut with the knife is made by pressing on the silicone, and not by cutting, sawing when using a conventional straight knife.

The silicone made in the USA for craft using only. Soap, Wax, Epoxy resin etc...
Color: Pink/Neon pink color. The tint can range from light to bright neon pink.
Useful Temperature Range -65F to 400F. (-53C to 205C).
Hardness - 10A Shore.

Cleaning Your Silicone Mold:
Wash your silicone mold with warm/hot water and mild liquid dish soap.
Pat dry thoroughly and then let the mold air-dry fully.
Never use any type of abrasive soap, cleaner or pad to clean your silicone mold!

Directions for soap making:
1. Spray (mist) inside surface of the silicone mold with alcohol (70-99 %)
2. Fasten the mold with elastic bands (if there are slits on the mold)
3. Pour soap base into the mold.
4. Shake the mold and gently tap on outside walls the mold to release air bubbles.
5. Place the mold with soap in the room with the cool temperature until the soap completely cooled off and hardened.
6. Gentle separated the edges of the mold from the soap and apply pressure on the bottom of the mold to release the soap from the mold.
7. Place your soap in a dry environment for 12-24 hours and when pack.